8mm x 30m Graphite Synthetic 12-Strand Dyneema ® Winch Rope With Hook

8mm x 30m graphite 12-strand dyneema ® synthetic winch rope with a thimble spliced one end with 2T Safe working load safety hook.  Heat sealed the other end.

• High Strength - Weight for weight, Dyneema ® is 15 times stronger than steel
• Light Weight - Dyneema's light weight significantly improves the ease of handling winch ropes
• Floats - An obvious benefit when winching in water logged conditions or flooded environments
• No Kinks - Unlike steel wire, these winch ropes will not kink and loose strength
• No Splinters - Handling steel wire often results in wire splinters - no issues with synthetic winch ropes
• Overlapping - Steel wire will crush and loose strength if overlapped on a winch drum.  Synthetic winch ropes will not lose strength when overlapped or crushed
• No recoil - In the unlikely event of breakage there is virtually no recoil.
• Heat set and pre-stretched to maintain a firm round cross section and enhanced handling characteristics
• Break Load - 5,300kg.

The difference between the WLL and breaking strength is important because it determines the safety margin or factor of safety. The safety factor is the ratio of the breaking strength to the WLL, and it represents the degree of safety built into the equipment. The higher the safety factor, the safer the equipment is. The standard safety factor for lifting equipment is usually 8:1 or higher, which means that the breaking strength is at least eight times the WLL.